My first circuit: 74155

An area for asking questions, making suggestion, share ideas and place circuit examples.
Prof_Magnesium
Posts: 27
Joined: Sat Apr 28, 2018 7:19 am
Location: Brazil
Contact:

Re: My first circuit: 74155

Post by Prof_Magnesium »

I am enjoying a lot LogicCircuit. Here are more 3 ICs I have mounted.
The attachment IC74253.CircuitProject is no longer available
The attachment IC74257.CircuitProject is no longer available
IC74253.CircuitProject
(40.55 KiB) Downloaded 1011 times
Prof_Magnesium
Posts: 27
Joined: Sat Apr 28, 2018 7:19 am
Location: Brazil
Contact:

Re: My first circuit: 74155

Post by Prof_Magnesium »

IC74257.CircuitProject
(32.17 KiB) Downloaded 1026 times
Prof_Magnesium
Posts: 27
Joined: Sat Apr 28, 2018 7:19 am
Location: Brazil
Contact:

Re: My first circuit: 74155

Post by Prof_Magnesium »

IC74393.CircuitProject
(51.84 KiB) Downloaded 992 times
Prof_Magnesium
Posts: 27
Joined: Sat Apr 28, 2018 7:19 am
Location: Brazil
Contact:

Re: My first circuit: 74155

Post by Prof_Magnesium »

Adding more 3 CIs.
The attachment IC74241.CircuitProject is no longer available
The attachment IC74192.CircuitProject is no longer available
IC74241.CircuitProject
(22.25 KiB) Downloaded 890 times
Prof_Magnesium
Posts: 27
Joined: Sat Apr 28, 2018 7:19 am
Location: Brazil
Contact:

Re: My first circuit: 74155

Post by Prof_Magnesium »

IC74192.CircuitProject
(102.79 KiB) Downloaded 976 times
Prof_Magnesium
Posts: 27
Joined: Sat Apr 28, 2018 7:19 am
Location: Brazil
Contact:

Re: My first circuit: 74155

Post by Prof_Magnesium »

IC74193.CircuitProject
(105.21 KiB) Downloaded 938 times
Prof_Magnesium
Posts: 27
Joined: Sat Apr 28, 2018 7:19 am
Location: Brazil
Contact:

Re: My first circuit: 74155

Post by Prof_Magnesium »

I tried to simulate the 74122 and 74123 one-shot CIs. I used the ideia of counting a number of periods of the clock. My project has an 8-bit counter which resets a D flip-flop when the count is equal to the preset value. This value is informed with two nibbles (2 x 4 bits) specific to each one-shot circuit. This mean that it replaces the R-C analogue delay. However I have some doubts about the validity of the method:
(1) which factors define the clock frequency?
(2) the clock I put in one timer circuit is the same for the whole simulation, or independent?
Finally I think that it would be interesting to introduce an analogue part in LogicCircuit to simulate these one-shot circuits, for instance, such as a R-C element that could be charged with a high level applied to it, combined with Schmidt triggers, for example.
IC74122-123.CircuitProject
(229.44 KiB) Downloaded 911 times
Prof_Magnesium
Posts: 27
Joined: Sat Apr 28, 2018 7:19 am
Location: Brazil
Contact:

Re: My first circuit: 74155

Post by Prof_Magnesium »

Going on: one more 74xxx. I should stop now because I have now all the TTL IC I needs to simulate my 8-bit computer.
The attachment IC74170.CircuitProject is no longer available
I started to build RAM and ROM. To load the ROM I was surprised by the fact that the data must be stored in binary files. But it was not very difficult to transform ASCII in binary.
The attachment IC_S287.CircuitProject is no longer available
The attachment IC_S288.CircuitProject is no longer available
The attachment IC_2716.CircuitProject is no longer available
IC74170.CircuitProject
(133.24 KiB) Downloaded 977 times
Prof_Magnesium
Posts: 27
Joined: Sat Apr 28, 2018 7:19 am
Location: Brazil
Contact:

Re: My first circuit: 74155

Post by Prof_Magnesium »

The attachment IC_S287.CircuitProject is no longer available
IC_S287.CircuitProject
(18.3 KiB) Downloaded 1245 times
Prof_Magnesium
Posts: 27
Joined: Sat Apr 28, 2018 7:19 am
Location: Brazil
Contact:

Re: My first circuit: 74155

Post by Prof_Magnesium »

I put one file at a time because it doesn't work when I put more than one!
IC_S288.CircuitProject
(19.09 KiB) Downloaded 1202 times
Post Reply